Pro’s Choice Stain Magic®
2-part system
for removing
organic and natural stains
from Bane-Clene®
Stain Magic is a two-part system formulated especially
for removing organic and natural stains such as tea, herbal tea, coffee,
mustard, wine, vomit, and natural juices. The system combines two powerful
stain removing solutions that attack these extremely difficult stains.
Part "A" contains an oxidizing bleach and Part "B" contains wetting agents
and a volatile alkaline activator.
Stain Magic is easy to use:
- Extraction clean (preferably with water) the spot to remove all surface contamination.
- Blot the spot as dry as possible with a dry white clean towel.
- Mix equal parts of Solution A and Solution B in a clean separate container. Mixed solution must be used within five minutes. Do not place mixed solution in a closed container.
- Apply the mixed solution to the stain liberally and evenly to wet all the stained fibers and agitate gently. A trigger sprayer works well for this.
- Covering treated fibers with clear plastic will improve performance.
- Dwell Time: You may see the stain disappear immediately, or it may require 1-2 hours for the chemical reaction to reach completion.
- Rinse with hot water extraction.
- If a heavy spill, use Stain Blotter to prevent wicking.
- For curry and mustard, steam heat or the Energizer Light is required:
- Extraction clean (preferably with water) the spot to remove all surface contamination.
- Blot the spot as dry as possible with a dry white clean towel.
- Mix equal parts of Solution A and Solution B in a clean separate container. Mixed solution must be used within five minutes. Do not place mixed solution in a closed container.
- Apply the mixed solution only to the stain liberally and evenly to wet all the stained fibers and agitate gently. A trigger sprayer works well for this.
- If using a steam iron:
- Prepare a damp towel and wring out until moderately damp and cover the stain with the damp towel. Apply steam heat to the towel for 1 – 3 minutes, using a steam iron filled with water and set at the lowest setting.
- DO NOT SET IRON DIRECTLY ON CARPET! Because of its low melting point, do not use an iron on olefin.
- Apply the iron directly over the towel covering the stain. Check the stain every 15 seconds. When the stain disappears, discontinue heat and remove the iron and the towel. Be alert for fibers that are not colorfast - if you see color loss, discontinue the heat immediately!
- If using the Energizer Light:
- Saturate stain with the mixed Stain Magic solution.
- Cover stain with the Energizer Light.
- Allow the lamp to dwell for time required causing the stain to
disappear. Time will vary from 30 minutes to 6 hours depending on
severity of stain.
- Extraction rinse the treated area to remove any residue and dry
thoroughly.
- If a heavy spill, use Stain
Blotter to prevent wicking.
Use Concentration: Mixed, Undiluted.
Shelf-life unmixed: 6 months.
CAUTION: Removal of some of the carpet dye is
always possible in this type of system!
Do not use on natural fibers.
This product can cause yellowing of wool fibers if allowed to dwell for
extended periods of time.
Always test an inconspicuous area for color fastness before using.
May not be shipped via Air!
NOTE: For professional use only! Not for use by consumers!
Included in the Pro’s Choice Professional
Spotting Kit.
For removal of specific stain, use the Pro’s
Choice 50 page Stain Guide
Related Products:
Related Articles and Information:
Click for a Material Safety Data Sheet on Stain Magic Part A in Adobe Acrobat format.
Click for a Material Safety Data Sheet on Stain Magic Part B in Adobe Acrobat format.
Order Form:
|