Hydro-Force SX-15 Hard Surface Cleaner
The latest technology for cleaning tile and grout!Hard Surface tool for Ceramic Tile and Grout Cleaning

The SX-15 blasts soil and dirt from tile, grout and smooth or rough hard surfaces.

  • Industry-leading 15" cleaning path allows you to clean 25% faster than 12" models.
  • Aerodynamically-engineered radial vacuum line creates a laminar-flow vortex in the cleaning head that allows the SX-15 to remove water twice as fast as competitive models.
  • Tool-less design makes changing the boots a breeze! EZ-LOC™ boot uses no screws or pop rivets, simply disconnect solution hose from the swivel and release three locking levers to change your boot on the fly!
  • Toe-adjustable vacuum relief lets you adjust the suction strength on the fly.
  • Low profile allows the unit to fit under toe kicks.
  • Easy access inline filter makes cleaning the filter a snap.
  • Quality components will handle operating pressures from 700 to 2,000 PSI so you can blast away oily deposits.
  • Stainless steel handle and high-tech polymer casing will take a beating and ask for more.
  • Handles are spaced shoulder-width and allow you to use side-to-side or front-to-back cleaning strokes.
  • Lightweight construction makes it feel like the machine is floating along the floor.
  • Tool length is comfortable for users of all heights.
  • The SX-15 is ready to work with truckmount carpet cleaning machines, pressure washers and vac systems or high pressure portable extractors.
  • Works with front-to-back and side-to-side motion.
  • Works on uneven stone or tile surfaces or smooth concrete.
  • Light-weight (15.5 pounds).
  • Non-fatiguing: glides easily over the floor.
  • NOTES:
    • Do not exceed 800 psi on marble, slate, travertine, limestone, saltillo or sandstone.
    • Be sure the grout is in good condition before cleaning at high pressures!
    • Minimum solution pressure: 700 psi with a flow rate of 1.5 gpm to work properly.
    • Maximum solution pressure: 2500 psi. Recommended pressure range is 700 to 1500 psi ukp to 200 degrees F.
    • Do not use the hard boot on soft surfaces such as marble and limestone. The hard boot may scratch soft surfaces.

Specifications subject to change without notice.

The main tool for open area for cleaning the tile and grout!

Underside of boot

The Hydro-Force SX-15 Hard Surface Cleaner is designed to clean effectively on a wide variety of areas, including:

  • Restaurants
  • Schools
  • Garages
  • Bathrooms
  • Sidewalks
  • Grouted Tile
  • Ceramic Tile
  • Rubber Studded Floors

Related Stone, Tile and Grout Cleaning Products:

Related Stone, Tile and Grout Cleaning Articles:

Because of its weight and freight considerations, the Hydro-Force SX-15 Hard Surface Cleaner is not available for purchase on-line.
Call 800-428-9512 (U.S. ONLY!) to purchase.
Print